Filename:

tidf-A.210

Author:

Jim Evans

Title:

Single Component

Design Source:

IDF Version 2.0
tidf-A.brd
tidf-A.lib

Source Schema Date:

Mon Sep 4 18:51:43 EDT 2000

Validation Schema Date:

Mon Sep 4 18:51:43 EDT 2000

Conformance Class:

Recommended Practice Reference:

Translators:

IDF to AP210 Translator 11/13/00

TLDi PCBto3D - IDF to Solid Edge V8:

PCBto3D.par: board part

pn-cap,cc1210.par: component part

PCBto3D.asm board: assembly

DOS xtranslator idf203n.exe - IDF to STEP 203

tidf-A.step: STEP203 File

Solid Edge STEP Translator - STEP203 to Solid Edge V8

test_design.par: board part

Test.desig1.par: component part

Test_design.asm: board assembly

PostProcessing:

None

Test Purpose:

Simple rectangular board with one component

Applicable Rules Clauses:

RULE LIST

SEDS (Step Enhancement and Descripency System):

N/A

Description:

Single board 2.0 x 1.5 inches with single component placement on top side at location 1.0, .75 inches

Supporting Graphics:

Figure 1: Result of direct translation using PCBto3D.
Note: Center plane of board lies on the Z=0 plane. Colors are defined in PCBto3D settings and are not included in IDF data. Component reference designation and part number are reflected in file name of component. Assembly and board file names are not read from the IDF data but are entered by the user during translation.
Figure 1: Result of translation from IDF to STEP203 to Solid Edge.
Note: Top surface of board is located on Z=0 plane. Board and component file names are sequential based on the BOARD NAME form the IDF file. Component part number and reference designator data is in the STEP203 file, but is not used during translation to Solid Edge V8.

Testing History:

  1. A direct translation using TLDi Software PCBto3D from IDF to Solid Edge.
  2. Translate IDF files to STEP AP203 file format. Rename resulting STEP file from tidf.step to tidf.stp. Inport STEP file into Solid Edge